Properties
Application
The micro-processed PSG Controller ST 49 serves for temperature control of the gas sampling probes PSG Basic Probe and PSG Plus Probe as well as for the PSG Basic Heated Sampling Tube and the heated sample lines PSG Extruded, PSG Plus Extruded, PSG Basic Flex and PSG Plus Extruded Hybrid. Also, for heating sleeves and heated wall ducts the controller is applicable.
Technology
The PSG Controller ST 49 is a PID-controller that will be parameterized in different levels for the individual needs of the respective devices. The controller is available for 115VAC, 230VAC and 400V 3ph. The solid-state relay is mounted on a heat sink and has 25A switching capacity for 115/230VAC and 50A for 400V 3ph. Controller and relay are suitable for DIN rail or wall mounting.
Functions
Beside resistance sensors and semiconductor thermocouples the multi-sensor input of the PSG Controller ST 49 can equally process 0…10V and/or 4…20mA. The PID and/or thermostat control can be activated by parameter setting. Different outputs are available, such as two relay contacts, a voltage output for the solid-state relay and an analogue output. A temperature limiter function with alarm message is also available. Red LEDs indicate the status of the output relays. The set-points and parameters determining the process are adjusted by a 4-field foil keyboard.
You may also be interested in
Solid particle filters for reliable protection of the analyser against solid particles
Sampling Tubes in various materials and length for different applications
6 mm / 8 mm Pressure Reduction Valve for Protection of the Sampling System
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes and small bending radius
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIC
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIB
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes
Self limiting mobile Probe heated up to 180°C holding temperature for temporary CEMS
Controlled Probe up to 200°C holding temperature and double back purge for Process measurement with high dust load
Controlled DeNOx Probe up to 315°C holding temperature for SCR and SNCR applications with separator vessel for Ammonia salts
Self limiting Probe with 90 °C holding temperature with explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 Gb
Controlled Probe up to 315°C holding temperature for Process and Emission measurement with high dust load
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) wiith PTFE / PFA tubes, coextruded jacket extreme flexible
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes, coextruded with extreme robust Ringwell Jacket
Controlled All-in-One Sample Line with 200°C holding temperature and configurations for the complete operation of the probe and preheated back purge air
Controlled Sample Line for up to 200°C holding temperature, cut-to-length with PTFE /PFA tubes, max. length 300m (heating circuit 73 m) and small bending radius
Regulated line for up to 200°C holding temperature, with 2 heated ends, can be shortened, max. 300 m (heating circuit length 73m), 2 x PTFE inner core.
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 150°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 73 m) and up to PTFE /PFA inner tubes (exchangable as option)
Self-regulating or regulated duo probe up to 250°C holding temperature for simultaneous sampling from 2 outlets at low to medium dust loadings
Self regulating or controlled Probe heated up to 200°C holding temperature for CEMS and low to medium dust load
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes for CEMS, flexible PA 12 Jacket
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 60 m) and up to 2 PTFE inner tubes
NO2/NO Converter as 19″ rack version with and without bypass valve or in stainless steel housing for wall mounting without bypass valve
Liquid Stop filter as protection of the analyser against intrusion of liquid particles down to 0,2µm
Heated Wall Bushings for 180°C Holding Temperature in various lengths
Temperature controlled Heated Sample Tubes for 180°C Holding Temperature
Corrosion resistant heated PTFE diaphragm sample gas pump , 10,5 l/min flow rate, Motor IP54, Heater IP20 for ATEX Ex II 2G Ex h IIB+H2 T4 Gb
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation and compact design 7.5 l/min. flow rate, Motor IP66, Pump IP55 for ATEX Ex II 2G Ex h IIB+H2 T4 Gb
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation 7,5 l/min. flow rate, IP54
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation and compact design 5.5 l/min. flow rate, IP20
Corrosion resistant PTFE diaphragm sample gas pump (Integration into the MAK product line possible)
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
Condensate sensor for detecting condensate breakthrough in the analyzer system to protect the analyzer
Aerosol Filter for protection of the analyser against aerosols by durable corrosion resistant materials
Adsorption Filter filled with various adsorption materials by large reaction surface