Properties
Application
The controlled heated sample lines series PSG Plus Extruded Plus are used for continuous extractive gas analysis. They serve primarily for the transport of the humid sample gas stream from the sample point to the analyzer house. The holding temperature of the line thereby has to be above water vapour resp. acid dew point of the sample gas. In this way uncontrolled condensation of water vapour on the way to the analyzer and therefore washing out of gas components in condensate is prevented. Also, failure of the measurement by a freezing line at ambient temperatures below 0°C is avoided.
By loading the video, you accept YouTube's privacy policy.
Learn more
Technology
The robust lines with plastic spring wire and thick-walled extruded flame resistant and extremely weather resistant TPU, PE or PVC outer jacket are equipped with high quality PSG-Plus parallel heating cable. Insulation is done with a thermal or glass fibre fleece. Up to 12 PTFE, PFA, stainless steel or special alloy tubes as internal line and also interchangeable internal tubes are available.
Functions
The lines are available up to 300m at a stretch e.g. on cable drum and then can be adapted on-site and shortened every 0,6m. Furthermore, they are available ready for operation ex works. Control of the lines to max. 200°C is done by an external temperature controller (e.g. Controller ST 49 or Controller DC-10) via the integrated PT100.
You may also be interested in
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes and small bending radius
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIC
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIB
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) wiith PTFE / PFA tubes, coextruded jacket extreme flexible
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes, coextruded with extreme robust Ringwell Jacket
Controlled All-in-One Sample Line with 200°C holding temperature and configurations for the complete operation of the probe and preheated back purge air
Regulated line for up to 200°C holding temperature, with 2 heated ends, can be shortened, max. 300 m (heating circuit length 73m), 2 x PTFE inner core.
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 150°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 73 m) and up to PTFE /PFA inner tubes (exchangable as option)
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes for CEMS, flexible PA 12 Jacket
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 60 m) and up to 2 PTFE inner tubes
Heated Wall Bushings for 180°C Holding Temperature in various lengths
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)